used in furnace kilns and other applications. Selection of a variety of high-quality ceramic materials, hot, dry-pressed or injection molding, from high-temperature sintering of alumina ceramic tubes, alumina ceramic rods (which can be mechanical or electronic finishing, the tolerances up to +/- 0.01mm), high hardness, insulation, wear-resistant, high temperature-resistant, hot and cold shock-resistant. Customers can request a special size and production.
VINER IndustrialAlumina Ceramic Plate Standard Sizes:
10x10x1mm, 20x20x2mm, 40x40x8mm,
100x60x8mm, 150x150x12.5mm, 200x200x25mm, etc.
Note: Other size can be produced according to customers’ requirement.
Characters of VINER IndustrialAlumina Ceramic Plate:
VINER Industrial factory can supply 99.7% High Purity Alumina Plate.
1. Extreme high temperature stability under reducing, inert and high vacuum condition under high temperature up to 1800C.
2. Extreme wear and abrasion resistance.
3. Chemical corrosion resistance under high temperature.
4. High dielectric properties.
5. Gas tight for many applications to provide protective atmospheres or high vacuum at high temperature to eliminate contamination or impurity.
VINER Industrial Alumina Ceramic Plate Main Performance Index:
|
Performance Index
|
99.7 Alumina
|
99 Alumina
|
85Alumina
|
|
Al2O3 (%)
|
99.7
|
99.3
|
85
|
|
SiO2 (%)
|
<0.1
|
—
|
—
|
|
Density (g/cm3)
|
3.95
|
3.88
|
3.2
|
|
Water Absorption (%)
|
0
|
0.01
|
0.2
|
|
Cld Compressive Strength (MPa)
|
450
|
350
|
200
|
|
20C Leak Rates (Torr/L.sec)
|
<10-11
|
<10-11
|
<0-11
|
|
Twisting In High Temperature (mm)
|
1700C
0.2 allowance
|
1600C 0.2 allowance
|
1400C
0.2 allowance
|
|
Bonding In High Temperature
|
1700C non-caked
|
1600C non-caked
|
1400C non-caked
|
|
20—1000C Coefficient of
Thermal Expansion (mm.10-6/C m)
|
8.6
|
8.2
|
8.2
|
|
Thermal Conductivity (W/m.k)
|
25
|
25
|
25
|
|
Electric Insulation Strength (KV/mm)
|
20
|
20
|
15
|
|
20C Direct Current
Insulating Resistance (Ohm/cm)
|
1014
|
1014
|
1014
|
VINER Industrial Alumina Ceramic Plate Typical Application:
VINER Industrial Alumina ceramic Plate is mainly applied to wear, serious scour of material handling occasions, such as coal-fired power generation, metallurgy, coal, mining, industry, and other geological materials pipeline, as well as the use of electronic appliances such as insulation pipe; alumina ceramic rods is widely used in the industry of resistance to temperature and thermostat, as a resistance ceramic matrix and two-metal thermostat used in ceramic-top column.
1) High power equipments
2) IC MOS pipe
3) High frequency prower source, communication, mechanical equipment.
4) Heavy current, heavy voltage, high temperature, thermal conductive insulating parts.
VINER IndustrialAlumina Ceramic PlatePackage:
Polyfoam Filled, Wooden Box Outside.
VINER IndustrialAlumina Ceramic Plate Shipping:
VINER Industrial could supply you the follow shipping way for your choice:
--By DHL/Fedex (Door to door, Home delivery service)
--By Air to your nearest Airport
--By Sea to your nearest Seaport
--By the sellers’ shipping agent
VINER Industrial Alumina Ceramic PlateWarranty:
Our Alumina Tubes are warranted to be free from defects in materials or workmanship for 6months from the date of purchase. This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.
VINER Industrial Alumina Ceramic Products:
The content of 99.7%, 99%, 95% alumina products contains the crucible, sockets, valves, electrodes, spools, wear board, alumina balls, electronic porcelain, textile porcelain pieces, and other shaped pieces.
Alumina Ceramic Tube
Alumina Ceramic Protective Tube
Alumina Ceramic Crucible
Alumina Ceramic Boat
Alumina Ceramic Plate
Alumina Ceramic Disc
Alumina Ceramic Rod
Alumina Ceramic Ring
Alumina Textile Ceramics
Alumina Ceramic Balls
Welcome to visit manufacture line!! Wait for your testing our Alumina Ceramic products!!
Company Information
VINER IndustrialSpecializes in 99.9%, 99.7%, 95%, 90%, 85%, 80% and 60% Alumina Ceramics Tube/Protective Tube/Crucible/Boat/Rod/Ring/Plate/Roller/Tile/Block/Brick/Balls/Insulators types. Welcome to inquiry for our Alumina Ceramics, our new fresh prices will be offered to you. Also different sizes and kinds of high temperature furnaces, such as Muffle Furnace, Vacuum/Vertical/Rotary/Multi-Position/Multi-Zones Tube Furnace, Vacuum Furnace, Atmosphere Furnace, Crucible Furnace, Loading and Bottom Furnace, Zirconia Sintering Furnace, Vacuum Drying Oven, the chamber sizes could be according to customers' design.
What is more, VINER Industrialproduces and supplies high temperature Kiln Furnace Spare Parts including MoSi2/SiC heating elements, Ceramic Fiber Refractory, Alumina/Zirconia Ceramics, SiC Ceramics, Boron Nitride (BN) Ceramics, Vacuum Flanges, Thermocouple, PID Temperature Controller, Quartz Furnace Tube, Resistance Wire, etc. Ps kindly inquiry us, we will try our best to serve you.
Welcome to visit manufacture line and test our sample!!
